TILAK MAHARASHTRA VIDYAPEETH
(DEEMED UNIVERSITY)
Semester-wise structure
|
CODE |
SUBJECT |
TH |
MIN |
PR/ TW/OR |
MIN |
TOTAL |
|
|
|
|
|
|
|
|
Semester I |
||||||
|
|
|
|||||
|
CO-301 |
Digital Electronics |
100 |
40 |
25 |
10 |
125 |
|
CO-302 |
Electronic Materials & Components |
100 |
40 |
50 |
20 |
150 |
|
C0-303 |
C Programming |
100 |
40 |
50 |
20 |
150 |
|
C0-304 |
Digital Presentation Techniques |
100 |
40 |
|
|
100 |
|
CO-305 |
Essentials of Desk Top Publishing |
100 |
40 |
25 |
10 |
125 |
|
|
|
|
|
|
|
|
|
|
Total of this semester |
500 |
200 |
150 |
60 |
650 |
Semester II |
||||||
|
|
|
|||||
|
CO-401 |
Data Structure |
100 |
40 |
25 |
10 |
125 |
|
C0-402 |
Applied Mathematics - III |
100 |
40 |
|
|
100 |
|
C0-403 |
C++ with OOPS |
100 |
40 |
50 |
20 |
150 |
|
C0-404 |
Visual Basic 6.0 |
100 |
40 |
25 |
10 |
125 |
|
C0-405 |
Industrial Training |
|
|
100 |
40 |
100 |
|
|
|
|
|
|
|
|
|
|
Total of this semester |
400 |
160 |
200 |
80 |
600 |
TH-Theory PR-Practical TW-Term Work
|
CO-301 |
DIGITAL ELECTRONICS |
Period |
Marks |
|
|
Practical: - Nil TW/OR: - 25 Theory: - 80 marks, 20 marks internal, 3 hrs. |
48 |
100 |
|
SR.NO |
TOPIC |
PERIODS |
MARKS |
|
1 |
Number systems & Binary codes
1.1 Introduction to digital world, Difference between electronics and digital electronics difference between Analog & digital system1.2 Number systems: Binary, Digital, octal, & Hexadecimal, conversion of one number system to other, binary addition, subtraction, multiplication & division, use of 1’s& 2’s compliment in binary arithmetic.1.3 Binary codes: BCD numbers, weighted & non-weighted binary codes, 8421 BCD codes, Excess3 code & Gray code, BCD addition & subtraction, Alpha numeric code, ASCII. |
05 |
10 |
|
2 |
Logic Gates:
2.1 Basic logic gates: NOT, AND, OR using diodes, transistors, Truth Table Symbol, Logic Equation and applications.2.2 Universal Logic Gates: NOR, NAND using diodes, Transistors, Symbols, T.T, Basic logic Gate using universal Gate, Exclusive Gate.2.3 Concept of Boolean Algebra using Basic Logic Laws, Associative, Distributive laws, Demorgan’s Theorem, Numerical Examples.2.4 SOP & POS form & its applications, K-map reduction, Method for SOP 2,3,4 variable. |
07 |
14 |
|
3 |
Logic Families:Characteristic of IC Logic Gate, IC logic families HTL, TTL, ECL & CMOS, study of 7400TTL series, IC7400, 7402, 7404,7408,7432,7486. |
03 |
06 |
|
4 |
Digital system4.1 Types of digital system, their block diagram4.2 Triggering methods- edge &level4.3 Flip-flop –RS using NOR gates, clocked RS flip flop, race around condition, master slave JK flip flop with preset & clear T & D flip flop, application of flip-flops4.4 Flip flop IC-7476, 7474 |
04 |
08 |
|
5 |
Shift Resisters:5.1 Definition, types – SISO, SIPO, PISO, PIPO, universal bi-directional shift register- circuit diagram (using D flip flop) working T.T
|
03 |
08 |
|
6 |
Counters:6.1 Introduction, types –asynchronous, counters- up, down &up (using T F/F) ring counter-6.4 Applications of counter & comparison between asynchronous & synchronous counter.6.5 Comparison between counters & Registers.
|
05 |
10 |
|
7 |
Multiplexer & Demultiplexer:7.1 Necessity of MUX7.2 Principal of multiplexing & their diagram 2 to 1, 4 to 1, 8 to 1lines, Block diagrams, circuit diagrams & operating principles, application.7.3 Necessary of DeMUX.7.4 Principle of Demultiplexing & their types 1 to 2, 1 to 4, 1 to 8 lines, Block diagram, circuit diagrams Operating principle & Applications.7.5 Study of IC’s – 74138 |
05 |
10 |
|
8 |
Encoder & Decoder:
8.1 Encoder – Definition, Decimal to BCD, 8.2 Decoder – Definition, |
03 |
08 |
|
9 |
Arithmetic Logic Unit:9.1 Adders- Half & Full adders9.2 Subtractor- Half & Full subtractor. |
04 |
08 |
|
10 |
Data Converters:10.1 Necessity & their types.10.2 Analog to Digital Converters: Types- staircase ramp, successive approximation method.10.3 DAC IC’s & fields of application.
|
05 |
10 |
|
11
|
Memories:11.1 Introduction: Characteristics, classification – Random access & sequential access memories, Read – write (RAM) & Read only memory (ROM) volatile & Non- volatile memories, static & dynamic memory.11.2 Types of ROM’s – PROM, EPROM, EEPROM, Mask. |
04 |
08 |
TERM WORK / ORAL:
Students will complete the above assignments and prepare Journal. Completed journal will be considered while giving marks out of 25 as a term work/oral
----------------------
|
CO-302 |
ELECTRONIC MATERIALS AND COMPONENTS
|
Period |
Marks |
|
|
Practical: - Nil TW/OR: - 50 Theory: - 80 marks, 20 marks internal, 3 hrs. |
48 |
100 |
|
SR.NO |
TOPIC |
PERIODS |
MARKS |
|
1 |
Electronic materialsClassifications of materials Properties & application: Conducting materials (e.g. copper Aluminum, gold brass, tungsten, managing, bronze, phosphor bronze, constantan, Nichrome, carbon &tin), Insulating materials (e.g. mica, ceramic, glass, paper, rubber, natural resins, synthetic resin, thermoplastic resin, thermosetting resin), Dielectric materials (e.g. air, glass, paper, porcelain, polystyrene) Semiconductor materials (e.g. silicon, germanium, selenium, graphite, silicon carbide, gallium arsenide & cadmium supplied), Magnetic materials (e.g. CRGO, nickel ion alloy soft ferrites, perm alloy, rare earth cobalt, hard ferrites), Comparison of hysterics curves of soft & hard magnetic materials, Study of B-H curve of soft ion & ferrite of any one type
|
08 |
16 |
|
2 |
Electronic Passive Components –I
a. Difference between active & passive components Fixed resistors: · Color-coding, study of properties like temp coef, · Voltage coef. , Noise, operating range. · Power derating curve, pulse rating & skin effect. · Construction, specification & application of · carbon composition resistor, cracked carbon · resistor, metal film resistor & wire wound resistor. b. Variable resistor: · Construction, specification & application of · carbon composition resistor, cracked carbon · resistor, metal film resistor & wire wound resistor. c. Non linear resistor: · Thermistor - bead, probe, NTC, PTC, light · dependent resister, varistor, LDR. |
04 |
09 |
|
3 |
Electronics Passive Components –IIFixed capacitor: Principle of capacitor, capacitance working voltage, insulation resistance C/V ratio, power factor, frequency, E.S.R. Construction, specification & application of glass impregnated paper, metallised paper, ceramic aluminium and tantalum capacitor Variable capacitor: Air dielectric gang condenser, PVC dielectric gang condenser. Trimmer capacitor: Mica compression plastic dielectric,
|
04 |
09 |
|
4 |
Cables, Connectors & wiresCables: Characteristics, impedance, current carrying capacity & flexibility of cables, Construction, specification & application of coaxial cables, Wires: Construction, specification & application of Cu wires of different gauges, PVC coverings, Connectors: Specification of connectors like contact resistance, breakdown voltage & insulation resistance. Construction, specification & application of coaxial connectors like BNC
|
03 |
06 |
|
5 |
Inductor and Transformer Inductor: Concept, operation at low & high frequency, self & mutual inductance quality factor, inductive reactance, leakage inductance. Construction & application of air core, iron core, ferrite core, AFC, RFC, filter chokes Transformer - Basics of V, Z ratio, Types of transformer & I are power, auto, variable, audio freq., RFT &IFT, driver, isolation, pulse, current high voltage (EHT). Losses in transformer.
|
05 |
10 |
|
6 |
Switches, Relays & Display Switches: Definition of contact resistance insulation, resistance, contact current rating, no of poles, electrical, mechanical life operating time. Constructions, specification and applications of toggle switch, micro switch, DIPswitch, push button, proximity switch, and membrane switch. Relay: Definition of NO, NC contents operates time, release time, bounce time, mechanical & electrical life. Construction, specification & application of general-purpose electromagnetic relay, solid state relays. Display: Nixie tube, LED constructions, current & voltage rating, dual color LED 7- segment display. LCD – Alphanumerical display like Dot matrix. |
05 |
12 |
|
7 |
Microphones, Speakers & Batteries Microphones: Working principle microphone like carbon, capacitor, moving coli, crystal, ribbon. Loud speakers: Working, Construction & application of cone type horn type speakers woofer, tweeter & speaker. Batteries: Difference between primary & secondary cell. Types –Ni-Cd battery, lead acid battery.
|
06 |
12 |
|
8 |
Integrated Circuits & Surface mount Devices Integrated Circuit: Definition, advantages, process involved in manufacturing on monolithic IC, IC package. Surface Mount Devices: Meaning of SDM, Advantages, Types- SDM resistor, capacitor, transistor & IC |
07 |
14 |
|
9 |
Printed Circuit Board Introduction, advantages, types of PCB, Cu clad laminates & characteristics. |
06 |
12 |
TERM WORK / ORAL:
Students will complete the above assignments and prepare Journal. Completed journal will be considered while giving marks out of 50 as a term work/oral
Reference Books:
1) Electrical Engineering Material: N.Alagppan & T.N Kumar, TMH
2) Electronic Materials And Components: Grover And Jamwal, Dhanpat Rai &
Co.
3) Electronic Materials And Components: Joshi and Others, Nirali Prakashan.
CO-303 |
‘C’ PROGRAMMING |
PERIODS |
MARKS |
|
|
Practical: - Nil TW/OR: - 50 Theory: - 80 marks, 20 marks internal, 3 hrs.
|
48 |
100 |
SR.NO |
TOPIC |
PERIODS |
MARKS |
|
1 |
Introduction to ‘C’ Programming a) Introduction: Developing logic using flowcharts, Algorithms b) Getting started Basic structure of C program, character sets, keywords, identifiers, constants, variables, data types, declaration of variables, compiling & executing a sample program in C.
|
01 |
04 |
|
2 |
Operations & Expressions a) Character set of C b) Operators, Operands and Expressions Arithmetic, Relational, Logical assignment operators, variables, constants, data types, expressions, data type conversion, key words, hierarchy of operators |
04 |
08 |
|
3 |
Input and Output Statements a) ‘C’ Program structure, Type declaration, Input and O |